Aug 19, 2019  using the ssh-copy-id script; using Secure Copy (scp). In this article, you learned how to generate SSH key pairs and set up an SSH key-based authentication. We also covered copying keys to your remote CentOS server, and disabling SSH password authentication. Next, You Should Read. Apr 14, 2020 I configured authentication by ssh key and it works but when I restart the servers, they lose the authentication. I would like to know if I can create an ssh script which allows to launch the authentication at startup of the machines without entering the passphrase each time. SSH keys are a way to identify trusted computers, without involving passwords. The steps below will walk you through generating an SSH key and adding the public key to the server. Step 1: Check for SSH Keys First, check for existing SSH keys on your computer. Open Git Bash, Cygwin, or Terminal, etc. Creating an SSH key on Windows 1. Check for existing SSH keys. You should check for existing SSH keys on your local computer. You can use an existing SSH key with Bitbucket Server if you want, in which case you can go straight to either SSH user keys for personal use or SSH access keys for system use. Open a command prompt, and run.

1. Shell Script To Generate Ssh Keys
2. Script To Generate Ssh Keys
3. Generate Ssh Key File In Windows

Introduction

Secure Shell (SSH) is an encrypted protocol used by Linux users to connect to their remote servers.

Generally, there are two ways for clients to access their servers – using password based authentication or public key based authentication.

Using SSH keys for authentication is highly recommended, as a safer alternative to passwords.

This tutorial will guide you through the steps on how to generate and set up SSH keys on CentOS 7. We also cover connecting to a remote server using the keys and disabling password authentication.

1. Check for Existing Keys

Prior to any installation, it is wise to check whether there are any existing keys on the client machines.

Open the terminal and list all public keys stored with the following command:

The output informs you about any generated keys currently on the system. If there aren’t any, the message tells you it cannot access /.ssh/id_*.pub , as there is no such file or directory.

2. Verify SSH is Installed

To check if thw package is installed, run the command:

If you already have SSH, the output tells you which version it is running. Currently, the latest version is OpenSSH 8.0/8.0p1.

Note: Refer to our guide If you need to install and enable SSH on your CentOS system.

Steps to Creating SSH keys on CentOS

1. Start by logging into the source machine (local server) and creating a 2048-bit RSA key pair using the command:

If you want to tighten up security measures, you can create a 4096-bit key by adding the -b 4096 flag:

2. After entering the command, you should see the following prompt:

3. To save the file in the suggested directory, press Enter. Alternatively, you can specify another location.

Note: If you already have a key pair in the proposed location, it is advisable to pick another directory. Otherwise it will overwrite existing SSH keys.

4. Next, the prompt will continue with:

Although creating a passphrase isn’t mandatory, it is highly advisable.

5. Finally, the output will end by specifying the following information:

Now you need to add the public key to the remote CentOS server.

You can copy the public SSH key on the remote server using several different methods:

1. using the ssh-copy-id script
2. using Secure Copy (scp)
3. manually copying the key

The fastest and easiest method is by utilizing ssh-copy-id. If the option is available, we recommend using it. Otherwise, try any of the other two noted.

1. Start by typing the following command, specifying the SSH user account, and the IP address of the remote host:

If it is the first time your local computer is accessing this specific remote server you will receive the following output:

2. Confirm the connection – type yes and hit Enter.

3. Once it locates the id_rsa.pub key created on the local machine, it will ask you to provide the password for the remote account. Type in the password and hit Enter.

4. Once the connection has been established, it adds the public key on the remote server. This is done by copying the ~/.ssh/id_rsa.pub file to the remote server’s ~/.ssh directory. You can locate it under the name authorized_keys.

5. Lastly, the output tells you the number of keys added, along with clear instructions on what to do next:

1. First, set up an SSH connection with the remote user:

2. Next, create the ~/.ssh directory as well as the authorized_keys file:

3. Use the chmod command to change the file permission:

chmod 700 makes the file executable, while chmod 600 allows the user to read and write the file.

4. Now, open a new terminal session, on the local computer.

5. Copy the content from id_rsa.pub (the SSH public key) to the previously created authorized_keys file on the remote CentOS server by typing the command:

With this, the public key has been safely stored on the remote account.

1. To manually add the public SSH key to the remote machine, you first need to open the content from the ~/.ssh/id_rsa.pub file:

2. As in the image below, the key starts with ssh-rsa and ends with the username of the local computer and hostname of the remote machine:

3. Copy the content of the file, as you will need later.

4. Then, in the terminal window, connect to the remote server on which you wish to copy the public key. Use the following command to establish the connection:

5. Create a ~/.ssh directory and authorized_keys file on the CentOS server with the following command:

6. Change their file permission by typing:

7. Next, open the authorized_keys file with an editor of your preference. For example, to open it with Nano, type:

8. Add the public key, previously copied in step 2 of this section, in a new line in (under the existing content).

9. Save the changes and close the file.

10. Finally, log into the server to verify that everything is set up correctly.

Once you have completed the previous steps (creating an RSA Key Pair and copying the Public Key to the CentOS server), you will be able to connect to the remote host without typing the password for the remote account.

All you need to do is type in the following command:

If you didn’t specify a passphrase while creating the SSH key pair, you will automatically log in the remote server.

Otherwise, type in the passphrase you supplied in the initial steps and press Enter.

Once the shell confirms the key match, it will open a new session for direct communication with the server.

Although you managed to access the CentOS server without having to provide a password, it still has a password-based authentication system running on the machine. This makes it a potential target for brute force attacks.

You should disable password authentication entirely by following the outlined steps.

Note: Consider performing the following steps through a non-root account with sudo privileges, as an additional safety layer.

1. Using the SSH keys, log into the remote CentOS server which has administrative privileges:

2. Next, open the SSH daemon configuration file using a text editor of your choice:

3. Look for the following line in the file:

4. Edit the configuration by changing the yes value to no. Thus, the directive should be as following:

5. Save the file and exit the text editor.
6. To enable the changes, restart the sshdservice using the command:

7. Verify the SSH connection to the server is still functioning correctly. Open a new terminal window and type in the command:

In this article, you learned how to generate SSH key pairs and set up an SSH key-based authentication. We also covered copying keys to your remote CentOS server, and disabling SSH password authentication.

Next, You Should Read:

Shell Script To Generate Ssh Keys

SSH keys are a way to identify trusted computers, without involving passwords. The steps below will walk you through generating an SSH key and adding the public key to the server.

Step 1: Check for SSH Keys

Script To Generate Ssh Keys

First, check for existing SSH keys on your computer. Open Git Bash, Cygwin, or Terminal, etc. and enter:

Check the directory listing to see if you already have a public SSH key. By default, the filenames of the public keys are one of the following:

• id_dsa.pub
• is_ecdsa.pub
• id_ed25519.pub
• id_rsa.pub

If you see an existing public and private key pair listed (for example id_rsa.pub and id_rsa) that you’d like to use, you can skip Step 2 and go straight to Step 3.

Step 2: Generate a new SSH key

With your command line tool still open, enter the text shown below. Make sure you substitute in your email address:

You’ll be asked to enter a passphrase, or simply press Enter to not enter a passphrase:

After you enter a passphrase (or just press Enter twice), review the fingerprint, or ‘id’ of your SSH key:

Step 3: Add your key to the ssh-agent

To configure the ssh-agent program to use your SSH key, first ensure ssh-agent is enabled.

If you are using Git Bash, turn on the ssh-agent with command shown below instead:

Then, add your SSH key to the ssh-agent:

Step 4: Add your SSH key to the server

To add your public SSH key to the server, you’ll copy the public SSH key you just created to the server. Substitute “username” with your username on the server, and “server.address.com” with the domain address or IP address of your server:

The server will then prompt you for your password:

Generate Ssh Key File In Windows

That’s it! You should now be set up to connect to the server without having to authenticate.