Generate Crt And Key From P12

Generate Crt And Key From P12
  1. Generate Crt And Key From Pfx
  2. Generate Crt And Key From P12 1
  3. Generate Crt And Key From P12 File
  4. Generate Crt File From P12
  5. Generate Crt And Key From P12 5

Create a pkcs12 (.pfx or.p12) from OpenSSL files (.pem,.cer,.crt.) Find the private key file (xxx.key) (previously generated along with the CSR). Download the.p7b file on your certificate status page. A) Convert this file into a text one (PEM): On Windows, the OpenSSL command must.

Important: This example is intended to provide general guidance to IT professionals who are experienced with SSL requirements and configuration. The procedure described in this article is just one of many available methods you can use to generate the required files. The process described here should be treated as an example and not as a recommendation.

When you configure Tableau Server to use Secure Sockets Layer (SSL) encryption, this helps ensure that access to the server is secure and that data sent between Tableau Server and Tableau Desktop is protected.

How to convert a PFX to a seperate.key/.crt file. First type the first command to extract the private key: openssl pkcs12 -in yourfile.pfx -nocerts -out keyfile-encrypted.key What this command does is extract the private key from the.pfx file. Once entered you need to type in the importpassword of the.pfx file. $ openssl pkcs12 -export -out domain.name.pfx -inkey domain.name.key -in domain.name.crt This will create a pfx output file called “domain.name.pfx”. You will be asked for the pass-phrase for the private key if needed, and also to set a pass-phrase for the newly created.pfx file too. Crt and key files represent both parts of a certificate, key being the private key to the certificate and crt being the signed certificate. It's only one of the ways to generate certs, another way would be having both inside a pem file or another in a p12 container.

Looking for Tableau Server on Linux? See Example: SSL Certificate - Generate a Key and CSR.

Tableau Server uses Apache, which includes OpenSSL. You can use the OpenSSL toolkit to generate a key file and Certificate Signing Request (CSR) which can then be used to obtain a signed SSL certificate.

Steps to generate a key and CSR

Create a new file using Notepad. Paste the information into the new Notepad file. Save the file as certificate.crt. Notepad should save this file as certificate.crt.txt. Rename the new Notepad file extension to.crt. Creating your privateKey.key file: Return to the certificate.txt file generated above. Jun 19, 2015  pkcs12 – the file utility for PKCS#12 files in OpenSSL-export -out certificate.pfx – export and save the PFX file as certificate.pfx-inkey privateKey.key – use the private key file privateKey.key as the private key to combine with the certificate.

To configure Tableau Server to use SSL, you must have an SSL certificate. To obtain the SSL certificate, complete the steps:

  1. Generate a key file.
  2. Create a Certificate Signing Request (CSR).
  3. Send the CSR to a certificate authority (CA) to obtain an SSL certificate.
  4. Use the key and certificate to configure Tableau Server to use SSL.

You can find additional information on the SSL FAQ page on the Apache Software Foundation website.

Configure a certificate for multiple domain names

Tableau Server allows SSL for multiple domains. To set up this environment, you need to modify the OpenSSL configuration file, openssl.conf, and configure a Subject Alternative Name (SAN) certificate on Tableau Server. See For SAN certificates: modify the OpenSSL configuration file below.

Set the OpenSSL configuration environment variable (optional)

Generate Crt And Key From Pfx

To avoid using the -config argument with every use of openssl.exe, you can use the OPENSSL_CONF environment variable to ensure that the correct configuration file is used and all configuration changes made in subsequent procedures in this article produce expected results (for example, you must set the environment variable to add a SAN to your certificate).

Open the Command Prompt as an administrator, and run the following command:

set OPENSSL_CONF=c:Program FilesTableauTableau Serverpackagesapache.<version_code>confopenssl.cnf

Notes:

  • When setting the Open SSL configuration environment variable, do not enclose the file path with quotation marks.

  • If you are using a 32-bit version of Tableau Server on a 64-bit computer, run the set OPENSSL_CONF=c:Program Files (x86)TableauTableau Serverpackagesapache.<version_code>confopenssl.cnf command instead.

Generate a key

Generate a key file that you will use to generate a certificate signing request.

  1. Open the Command Prompt as an administrator, and navigate to the Apache directory for Tableau Server. For example, run the following command:

    cd C:Program FilesTableauTableau Serverpackagesapache.<version_code>bin

  2. Run the following command to create the key file:

    openssl.exe genrsa -out <yourcertname>.key 4096

    Note: This command uses a 4096-bit length for the key. You should choose a bit length that is at least 2048 bits because communication encrypted with a shorter bit length is less secure. If a value is not provided, 512 bits is used.

Create a certificate signing request to send to a certificate authority

Generate Crt And Key From P12 1

Use the key file you created in the procedure above to generate the certificate signing request (CSR). You send the CSR to a certificate authority (CA) to obtain a signed certificate.

Important: If you want to configure a SAN certificate to use SSL for multiple domains, first complete the steps in For SAN certificates: modify the OpenSSL configuration file below, and then return to here to generate a CSR.

  1. Run the following command to create a certificate signing request (CSR) file:

    openssl.exe req -new -key yourcertname.key -out yourcertname.csr

    If you did not set the OpenSSL configuration environment variable, OPENSSL_CONF, you might see either of the following messages:

    • An error message about the config information being unable to load. In this case, retype the command above with the following parameter: -config .confopenssl.cnf.

    • A warning that the /usr/local/ssl directory cannot be found. This directory does not exist on Windows, and you can simply ignore this message. The file is created successfully.

    To set an OpenSSL configuration environment variable, see Set the OpenSSL configuration environment variable (optional) section in this article.

  2. When prompted, enter the required information.

    Note: For Common Name, type the Tableau Server name. The Tableau Server name is the URL that will be used to reach the Tableau Server. For example, if you reach Tableau Server by typing tableau.example.com in the address bar of your browser, then tableau.example.com is the common name. If the common name does not resolve to the server name, errors will occur when a browser or Tableau Desktop tries to connect to Tableau Server.

Send the CSR to a certificate authority to obtain an SSL certificate

Send the CSR to a commercial certificate authority (CA) to request the digital certificate. For information, see the Wikipedia article Certificate authority and any related articles that help you decide which CA to use.

Generate Crt And Key From P12 File

Use the key and certificate to configure Tableau Server

When you have both the key and the certificate from the CA, you can configure Tableau Server to use SSL. For the steps, see Configure External SSL.

For SAN certificates: modify the OpenSSL configuration file

In a standard installation of OpenSSL, some features are not enabled by default. To use SSL with multiple domain names, before you generate the CSR, complete these steps to modify the openssl.cnf file.

  1. Open Windows Explorer and browse to the Apache conf folder for Tableau Server.

    For example: C:Program FilesTableauTableau Server<version_code>apacheconf

  2. Open openssl.cnf in a text editor, and find the following line: req_extensions = v3_reqGarry's mod key generator online.

    This line might be commented out with a hash sign (#) at the beginning of the line.

    If the line is commented out, uncomment it by removing the # and space characters from the beginning of the line.

  3. Move to the [ v3_req ] section of the file. The first few lines contain the following text:

    # Extensions to add to a certificate request
    basicConstraints = CA:FALSE
    keyUsage = nonRepudiation, digitalSignature, keyEncipherment

    After the keyUsage line, insert the following line:

    subjectAltName = @alt_names

    If you’re creating a self-signed SAN certificate, do the following to give the certificate permission to sign the certificate:

    1. Add the cRLSign and keyCertSign to the keyUsage line so it looks like the following: keyUsage = nonRepudiation, digitalSignature, keyEncipherment, cRLSign, keyCertSign

    2. After the keyUsage line, add the following line: subjectAltName = @alt_names

  4. In the [alt_names] section, provide the domain names you want to use with SSL.

    DNS.1 = [domain1]
    DNS.2 = [domain2]
    DNS.3 = [etc]

    The following image shows the results highlighted, with placeholder text that you would replace with your domain names.

  5. Save and close the file.

  6. Complete the steps in Create a certificate signing request to send to a certificate authority section, above.

Additional information

Generate Crt File From P12

If you prefer to use a different version of OpenSSL, you can download it from Open SSL for Windows.

Generate Crt And Key From P12 5

Thanks for your feedback!There was an error submitting your feedback. Try again or send us a message.