1. Generate Rsa Private Key Without Passphrase Password
2. Generate Rsa Private Key Without Passphrase Key
3. Generate Rsa Private Key Without Passphrase Code
4. Ssh Key Change Passphrase

Oct 05, 2007  ssh-keygen Tutorial – Generating RSA and DSA keys. In this post I will walk you through generating RSA and DSA keys using ssh-keygen. Public key authentication for SSH sessions are far superior to any password authentication and provide much higher security. I tried to generate the key without passphrase but when I try.

Just changing the passphrase is no substitute, but it is better than nothing. These instructions can also be used to add a passphrase to a key that was created without one. To change the passphrase, click on Load to load an existing key, then enter a new passphrase, and click Save private key to save the private key with the new passphrase. Here's how you can generate SSH public/private keys on Windows. Passphrase and someone steals the key from your USB device, they won’t be able to use it without.

The PuTTYgen program is part of PuTTY, an open source networking client for the Windows platform.

1. Download and install PuTTY or PuTTYgen.

   To download PuTTY or PuTTYgen, go to http://www.putty.org/ and click the You can download PuTTY here link.

2. Run the PuTTYgen program.
3. Set the Type of key to generate option to SSH-2 RSA.
4. In the Number of bits in a generated key box, enter 2048.
5. Click Generate to generate a public/private key pair.

   As the key is being generated, move the mouse around the blank area as directed.

6. (Optional) Enter a passphrase for the private key in the Key passphrase box and reenter it in the Confirm passphrase box.

   Note:

   While a passphrase is not required, you should specify one as a security measure to protect the private key from unauthorized use. When you specify a passphrase, a user must enter the passphrase every time the private key is used.

7. Click Save private key to save the private key to a file. To adhere to file-naming conventions, you should give the private key file an extension of .ppk (PuTTY private key).

   Note:

   The .ppk file extension indicates that the private key is in PuTTY's proprietary format. You must use a key of this format when using PuTTY as your SSH client. It cannot be used with other SSH client tools. Refer to the PuTTY documentation to convert a private key in this format to a different format.
8. Select all of the characters in the Public key for pasting into OpenSSH authorized_keys file box.

   Make sure you select all the characters, not just the ones you can see in the narrow window. If a scroll bar is next to the characters, you aren't seeing all the characters.

9. Right-click somewhere in the selected text and select Copy from the menu.
10. Open a text editor and paste the characters, just as you copied them. Start at the first character in the text editor, and do not insert any line breaks.
11. Save the text file in the same folder where you saved the private key, using the .pub extension to indicate that the file contains a public key.
12. If you or others are going to use an SSH client that requires the OpenSSH format for private keys (such as the ssh utility on Linux), export the private key:
    1. On the Conversions menu, choose Export OpenSSH key.
    2. Save the private key in OpenSSH format in the same folder where you saved the private key in .ppk format, using an extension such as .openssh to indicate the file's content.

Secure Shell (SSH) as defined in RFC4251 is a protocol for secure remote login and other secure network services over an insecure network. SSH consists of three main components: transport layer protocol, user authentication protocol and the connection protocol.

The transport protocol for SSH 2.0 as elaborated in RFC4253 provides a secured channel over an insecure network by performing host authentication, key exchange, encryption and integrity protection, and also deriving unique session ID that can be used by higher-level protocols.

The authentication protocol as elaborated in RFC4252 provides a suite of mechanisms that can be used to authenticate the client user to the server. There are three authentication mechanisms for SSH: public key authentication, password authentication, and host-based authentication.

The connection protocol as elaborated in RFC4254 specifies a mechanism to multiplex multiple data channels into a single encrypted tunnel over the secured and authenticated transport. The channels can be used for various purposes such as interactive shell sessions, remote command executions, forwarding arbitrary TCP/IP ports/connections over the secure transport, forwarding X11 connections, and accessing the secure subsystems on the server host.

Passwordless SSH Authentication Explained

This explanation can be somewhat lengthy and theoretical. You can skip to the setup part here.

Passwordless SSH can be considered another way of expressing SSH public key authentication especially without setting up a passphrase for the client key. A client host that wants to authenticate itself to a remote / target host, will have had its public key copied to and stored at the target host. The target host will then allow login from the client host by proving that the client host owns the private key that matches with the public key stored by the target host.

Figure 1: Passwordless SSH authentication mechanism

Figure 1 describes the public key authentication mechanism in SSH. As a prerequisite, the client generates its SSH key pair (the private and public key). After the client keys are generated, the client’s public key is exported / copied to the target host’s authorized public key list (Step 0). Additional configuration is performed on the server to allow public key authentication. This is necessary since in popular SSH server implementation such as OpenSSH, the default authentication method is password authentication.

SSH handshake is a mechanism for a client and server to establish a secure, encrypted communication channel for sending and receiving data. The handshake consists of several steps: protocol version exchange, key exchange, construction of new keys, and service request. Among these steps, the key exchange (KEX) represents the beginning of SSH authentication process. SSH 2.0 requires that Diffie-Hellman key exchange protocol be applied as the key exchange method.

During a key exchange (Step 1), client and server will each generate one-time / ephemeral session key pair. Client sends its ephemeral public key to the server in a SSH_MSG_KEXDH_INIT message and server responds with a SSH_MSG_KEXDH_REPLY message that provides the client with server’s ephemeral public key, server’s host public key, and the signature of the exchange hash. With this information, client will perform the following actions:

1. Server authentication: Client authenticates the server based on the host public key received from the server. The server identity can be initially unknown for the client so that it has to be added into the list of trusted hosts, which is usually stored in ~/.ssh/known_hosts file.
2. Shared secret and exchange hash construction: The client derives the shared secret from the server’s ephemeral public key and the exchange hash from the exchange hash signature. The shared secret and exchange hash will be used to create the keys for encrypting communication channel between the client and server.

Key exchange can be performed several times in a SSH connection. The exchange hash that is generated on the first key exchange is used as the session ID for the rest of SSH connection between the client and the server. This means that when the client or server performs key re-exchange to generate new ephemeral keys (especially in a long-running / persistent SSH connection), the client and server keep the same the same session ID despite the change in shared secret and exchange hash.

In Step 2, the client signs the session ID with its private key and sends authentication request to the server in a SSH_MSG_USERAUTH_REQUEST message. This message also contains client’s public key. In Step 3, the server will perform the following actions when receiving the message:

1. Client’s public key authorization: Server checks if the client is authorized to use public key authentication by going through its list of authorized public keys. If it cannot find the client public key in the list, the server will reject the authentication request and send SSH_MSG_USERAUTH_FAILURE message to the client.
2. Client authentication through signature check: Server uses the client public key to decrypt the signature and verify that the client and session ID info contained in the signature is correct.

If the server can confirm the authorization of the client’s public key and also verify the signature, it will notify the client that the authentication is successful by sending SSH_MSG_USERAUTH_SUCCESS message as represented in Step 4. Client follows up by sending SSH_MSG_SERVICE_REQUEST to request a service. There two predefined services in SSH 2.0: ssh-userauth for authentication service and ssh-connection for remote session service.

Let’s say the client requests the remote session service after successfully authenticated and needs to establish an interactive session. The client proceeds with sending SSH_MSG_CHANNEL_OPEN message to request the server to open a data channel. After the channel is opened, the client can specify the classification / type of the request sent through the channel by sending SSH_MSG_CHANNEL_REQUEST message. There are several request types, for example “shell” for remote shell, “env” for environment variable, or “exec” for remote command. Client proceeds with sending initial data for the request in SSH_MSG_CHANNEL_DATA message and remaining data, if any, in SSH_MSG_CHANNEL_EXTENDED_DATA. After data is transferred and request is completely processed, the server can send SSH_MSG_CHANNEL_CLOSE to close the channel. By receiving this message, the client can decide further action, for example disconnecting from the server by sending SSH_MSG_DISCONNECT message.

Figure 2 depicts the sequences of messages exchanged between the client and server when the client approaches the authentication using passwordless SSH. As can be seen in the picture, authentication is not a standalone process. It is interlinked with the subsequent actions to be invoked on the target host such as remote command execution, remote shell session, subsystem access, or X11 forwarding.

Figure 2: Sequences of messages exchanged in passwordless SSH authentication

It is important to note that message sequences exchanged between the client and server post the authentication process can be different with what’s shown on Figure 2. The sequences provided in the picture are exemplary and do not cover all the request types that are supported by the SSH connection protocol.

Password vs Passphrase

The default authentication in SSH is password authentication. The client authenticates against the server / target host by supplying a user name on the server and the password for the user. In public key authentication, the client authenticates against the server by supplying a user name on the server, client’s public key and signature that contains the session ID of the SSH connection.

When creating the SSH key pair, the SSH key generator may ask the user to create a passphrase. The passphrase is used to “unlock” the private key so that it can generate the signature. If user does not assign a passphrase, the private key is always “unlocked” and can immediately generate the signature.

Ansible openssl generate private key. Passwordless SSH involves both generating SSH key pair without a passphrase on the client side and authenticating against the server using client public key instead of the password for the user on the server side.

Passwordless SSH Setup on Ubuntu

To demonstrate passwordless SSH authentication, we will run a small testbed on Digital Ocean. You can sign up for a Digital Ocean account if you want to create a similar environment and follow all the steps listed in this article. Alternatively, you can set up the testbed on your own infrastructure and adapt the steps to your environment.

Figure 3 describes the network layout for the demonstration. The testbed consists of two machines. The first machine is the client and the latter is the server / target host. The machines are located in the Digital Ocean data center. Each is assigned both private and public IP addresses. The public IP address is accessible from the Internet. However, the private IP is only accessible from the data center network. The user is located in a home network and should access the machines through the Internet.

The user authenticates against the client and server machine with password authentication. The client machine will be configured so that it can use passwordless SSH to authenticate against the server machine.

Step 1: Create the machines for the testbed and assign a private IP to each machine

This step is specific to Digital Ocean. You can skip this when setting up on your own infrastructure.

Log in to your dashboard and create a new droplet by clicking the “Create” button at the top and choose “Droplets”.

Figure 4: Create droplet button

Configure the droplets as follows:
– From “Choose an image” section, choose Ubuntu as the image type.

– From “Select additional options” section, check the “Private networking” option

Figure 6: Enable private networking

– From “Authentication” section, choose “One-time password” option

– From “Finalize and create” section, create two droplets and assign name for each host

Figure 8: Assign host name to each droplet

Click “Create Droplet” button at the end of the page to finish the configuration and begin creating the droplets. After the droplets are created, they will be listed in the droplet list as shown below.

Step 2: Create a user for passwordless SSH authentication

Performing passwordless SSH authentication as root user is not recommended. A better approach is to create a non root user and delegate passwordless SSH authentication to the user. In this demonstration, we will create a user named “devops” on each machine.

– Login as root to the client machine
$ ssh root@CLIENT-PUBLIC-IP

– Create “devops” user for passwordless SSH
# adduser devops

Sample output:

– Obtain the private IP of the client machine
# ifconfig -a

Sample output:

Generate Rsa Private Key Without Passphrase Password

Figure 10: Sample client private IPv4 address

– Logout from the client machine
# exit

– Open another terminal and login as root to the server machine
$ ssh root@SERVER-PUBLIC-IP

– Create “devops” user for passwordless SSH
# adduser devops

Sample output:

– Obtain the private IP of the server machine
# ifconfig -a

Sample output:

– Logout from the server machine
# exit

Step 3: Create SSH key pair on the client machine

We will generate the SSH key pair for the “devops” user on the client machine and authorize the public key when logging as “devops” user on the target machine.

– Login as devops user to the client machine.
$ ssh devops@CLIENT-PUBLIC-IP

– Create SSH private/public key pair without passphrase
$ ssh-keygen -t rsa -f ~/.ssh/id_rsa

Sample output:

Figure 12: Sample SSH key pair generation

From the command above, the option “-t rsa” is used to specify RSA algorithm as the cryptographic algorithm with private key length of 2048 (default key length in OpenSSH). The option “-f ~/.ssh/id_rsa” is to specify the name and location of the private key file and implicitly the public key file.

It is important to note that you should not provide passphrase when generating the keypair. Simply press enter when you’re prompted with the passphrase input.

– Verify that private and public keys have been created
$ ls ~/.ssh/

Sample output:

From the sample output above, id_rsa is the private key file and id_rsa.pub is the public key file.

– Logout from the client machine
$ exit

Step 4: Copy client public key to the target host / server machine

For demonstration purpose, we will use scp to copy the client public key to the target host.

– Login as devops user to the target host
$ ssh devops@SERVER-PUBLIC-IP

– Create a directory named “.ssh” (without the quote) in the user home directory
$ mkdir ~/.ssh

– Change the directory permission to 700
$ chmod -R 700 ~/.ssh

– Copy the client public key using scp and rename it as authorized_keys
$ scp devops@CLIENT-PRIVATE-IP:/home/devops/.ssh/id_rsa ~/.ssh/authorized_keys

Crypto key generate rsa modulus. Note: this is a one-time action. If we want to authorize more public keys, we must append to authorized_keys file instead of creating a new one

– Change the permission of authorized key file to 600
$ chmod -f 600 ~/.ssh/authorized_keys

– Confirm the files in the .ssh directory
$ ls ~/.ssh

Sample output:

Figure 13: Sample commands to copy client public key

– Logout from the target
$ exit

Step 5: Confirm passwordless SSH login from client machine to the target host / server machine

– Login as devops user to the client machine
$ ssh devops@CLIENT-PUBLIC-IP

– Login to the target host / server machine with passwordless SSH and verify that no password is required in the process
$ ssh -v devops@SERVER-PRIVATE-IP

This time we use -v option to enable the verbose mode, which displays the debug message, so that we can analyze what’s happening under the hood. Sample output is provided below.

Figure 14: OpenSSH debug message for passwordless SSH connection

We can see from the image above that the passwordless SSH authentication with OpenSSH overall follows the SSH 2.0-related specifications and the sequences of the messages exchanged resemble those described in Figure 2. Another thing to note, during the key exchange, the client will authenticate the server. Initially, the client does not have information about the server. If the client trusts the server, it will store the hash of server info and public key to the ~/.ssh/known_hosts file.

When the server is reinstalled or IP address is taken by another server, the server public key will also change. As a result, the server authentication will always fail, which results in failed login to target host. As a remedy, we need to remove the known_hosts file on the client side and trust the new server public key.

Generate Rsa Private Key Without Passphrase Key

Appendix A: Passwordless SSH without Specifying a User Name

Specifying username when connecting to the target host is not always necessary. When the client does not specify the user name in the target host, the current user name used by the user to log in to the client machine will be supplied to the target host. This is very handy in simplifying the login command.

In our testbed, we created “devops” user on both client and server machines. After logging in into the client machine as devops user, we can login to the server machine as the same “devops” user without specifying the user name.

– Login to the client machine
$ ssh devops@CLIENT-PUBLIC-IP

– Login to the server machine as the same user with passwordless SSH and without specifying the user name
$ ssh SERVER-PRIVATE-IP

Sample output:

Figure 15: Passwordless SSH with and without supplying username

As can be seen in the image, connecting to the server machine with or without user name produces the same result.

Appendix B: Additional SSH Configuration on the Server Side

It is mentioned earlier that connecting as root user to a remote host is not a good idea. We can disable remote root login by configuring the SSH server. Additionally, we can set up the number of authentication retries so that server will simply reject authentication request after certain number of failed attempts. The steps are as follows:

– Login as root to the server
$ ssh root@SERVER-PUBLIC-IP

– Add the user used in passwordless SSH scheme into sudo group so that it can execute commands with root privileges
# usermod -aG sudo devops

– Edit SSH server configuration file to disable remote root login and also to set up connection timeout (e.g. one minute)
# vi /etc/ssh/sshd_config
..
PermitRootLogin no

MaxAuthTries 5
..

Generate Rsa Private Key Without Passphrase Code

– Restart the SSH daemon
# systemctl restart sshd

– Logout from the server
# exit

Ssh Key Change Passphrase

– Verify that root login is now disallowed
$ ssh root@SERVER-PUBLIC-IP

You will get an error message even though the correct root password is supplied

Closing Remarks

While the passwordless SSH setup is not complex, there is more nuance with the minutiae of messages exchanged between the client and server for the authentication purpose. Displaying the debug messages when performing SSH login provides better insight about the state of interaction between client and server as well as the usually hidden details, which may help troubleshoot a case of failed authentication.